If you're constantly being asked to calibrate more and more with less and less, Fluke's 9100 Calibration System is the answer you've been waiting for. Its exceptional performance in both the analog and digital domain allows it to calibrate an extremely wide range of test and measurement equipment - quickly, efficiently and to ISO 9000 requirements.

For the 9100, calibrating everything from handheld digital multimeters to high performance digital-storage oscilloscopes is all part of a day's work.

Take advantage of the Model 9100's unique procedure mode, which guides operators step-by-step through the entire calibration process, and you'll not only calibrate more with less - you'll do it faster.

The 9100 is a multifunction calibrator with a breadth and depth of outputs never before available from a single calibration source. In addition to DC and AC voltage to 1050V, variable Resistance to 400MΩ and DC and AC current to 20A (1000A via the optional current coils), the 9100 delivers continuously variable capacitance values to 40mF and conductance values to 2.5 milliSiemens. It also generates digitally synthesized and phase-locked sine, square, triangle, impulse and trapezoidal waveforms, variable amplitude pulses to 10 MHz, pulse widths to 2 seconds, and duty cycles between 0.05% and 99.95%.

Add one of the two oscilloscope calibration options and it generates all the waveforms required to calibrate oscilloscopes up to 250 MHz or 600 MHz.

Fit the insulation/ continuity tester option and it synthesizes resistance values as high as 2GΩ at test voltages up to 1000V. Fit the power meter option and it simultaneously generates variable phase angle voltages and currents that allow you to calibrate power meters up to 1 MW or 1 MVAR.

No other multi-product calibrator gives you such wide workload coverage and versatility. Weighing in at only 41 lbs (18.5 kg), it's also the ideal solution to on-site calibration.

Model 9100 - the low-cost solution to calibrating:-

　

Calibrates over 15 different categories of general-purpose test equipment Options for power meter, insulation/continuity tester and oscilloscope calibration - internally installed and retrofittable Semi-automated and fully automated procedure modes for maximum calibration throughput Fully supported by MET/CAL Plus software and procedure libraries Rapid return on investment Intuitive front panel operation for ease of use