|
| |
| > Idec Product Center > Idec
Terminal
Blocks |
|
|
|
|
|
|
|
|
Touch Down Terminals
Q: What is
meant by "touch down terminals"?
A: Touch down terminals
are screw terminals where the screw is held captive in
a cammed carrier. This is especially useful for ring
lug terminated wires in that the ring lug can be
inserted in the terminal block and the screw pushed
down, but not tightened, to hold the wire in place.
This allows coming back to the same terminal again to
add another wire or to tighten with a power
screwdriver.
|
|
|
|
 |
Key Features |
 |
- Modular construction
- Optional dust covers and marking strips
- UL94-V0 flammability rating
- Mount on standard 35mm DIN rail
- BN: Current capacities up to 150A
- BNH: Current capacities up to 50A
- BN: Fuse blocks for 1/4 x 1-1/4 fuses (optional
blown fuse indication)
- BNH: Unique Touch-Down terminals make wiring
ring terminals especially convenient
|
|
BN/BNH Series |
|
The BN series of terminal blocks are
a traditional screw terminal block. With full size
screws (nut and bolt termination on larger models) and
current ratings up to 150A, there is a BN series
terminal block for almost any application. A UL94-V0
flammability rating ensures safety. Dust covers and
fuse holders with optional blown fuse indication round
out the offering. All models mount onto standard 35mm
DIN rail.
The BNH series of terminal blocks feature a unique
"touch-down" terminal that makes wiring
ring-lugs easier than ever before. These terminals use
full size screws in various sizes, held captive by
unique cammed carrier armature. Modular construction
allows for stacking of multiple size blocks, with only
one endplate required per run. Optional jumper strips
and dust covers simplify wiring and protect terminals. |
|
|
|
|
Key Features |
|
- One piece construction, no end plates required
- Mount onto standard 35mm DIN rail
- Current capacities up to 40A on BA power
blocks, 350A on BN power blocks
- UL94-V0 flammability rating
- BA power blocks available in 1 pole (15A, 20A,
and 30A) or 3 pole (40A).
- BN power blocks available in 2, 3, or 4 pole
(up to 350A).
- Fuse holders with optional blown fuse
indication
- Optional dust covers and marking strips
|
|
BA Series One
Piece Terminal Blocks |
|
| The BA series of terminal blocks
features a one-piece construction that makes
installation very simple. Available in current
capacities from 10A to 40A, all models are made from
UL94-V0 material for excellent flame and heat
resistance. All models mount onto standard 35mm DIN
rail. Fuse holders for 1/4 X 1-1/4 size fuses
include optional blown fuse indication. |
|
|
|
|
Key Features |
|
- Unique touch-down terminals
- Standard and PLC MIL connector models
available
- All units are molded from UL94-D0 material
with excellent flame- and shock-resistance
- Mount on DIN rail or flat surface
- Current capacity: 1A
- Available with 10, 16, 20, 34, 40, and 50
pins
- Ul and CSA approvals
- Hinged covers with built-in marking strips
|
|
BX Series
Terminal Blocks |
|
| The BX series of terminal blocks
provides a wiring junction for MIL-style ribbon
cables. Available in several industry standard and
PLC MIL connector models, with screw terminals or
our unique touch-down terminals, the BX series
also features a highly visible hinged marking
strip to clearly label connections and
terminations. Like all other IDEC terminal blocks
they are UL and CSA approved, with excellent flame
and shock resistance and are DIN-rail mountable. |
|
|
| |
|
|
