|
| |
| > Idec Product Center > Idec
IEC Contactors |
|
|
|
|
 |
|
|
 |
Key Features |
 |
- 35mm DIN rail or direct panel mounting
- Models available to switch from 1/3HP up to
200HP motors
- Meets IEC, UL, c-UL and other international
standards
- Advanced design and materials, special
silver-alloy long life contacts
- Cadmium-free contacts for environmental safety
- Available with both forward and reversing
starters and contactors
- Bimetallic thermal overload relays
- All contactors and thermal overload relays bear
the CE mark
- Dual frequency 50/60Hz AC coils
- DC coil models available
|
|
YS Series Contactors |
|
YS contactors are used for switching
motor come in both reversing and non-reversing models
and meet all IEC, UL, and c-UL standards. All YS
series contactors feature weld-resistant silver alloy
contacts, giving them a high-level of reliability and
an extra long life.
YS starters are also available in both reversing and
non-reversing models. Both feature bimetallic thermal
overload relays directly mounted to the contactor.
Mechanical interlock mechanism prevents the forward
and reverse contactor from closing at the same time.
A full range of accessories are available for the YS
series including top and side mounting auxiliary
contact blocks, coil surge suppressors, relay
interface modules, timers, and more. |
|
|
|
|
 |
|
|
|
Auxiliary
Contacts
Q: I
have found the YS series IEC contactor that I
need, but it doesn't have enough auxiliary
contacts. Can I specify more?
A: Each size contactor
comes with a fixed number of either NO or NC
auxiliary contacts built in. On smaller models
(12F and smaller) there is an option for 1NO or
1NC. Larger models come with either 1NO/1NC or
2NO/2NC depending on the size. Additional
auxiliary contacts must be ordered separately as
an accessory. There are options for top or side
mounting as well as different numbers of NO and NC
contacts.
|
|
|
|
|
