|
| |
| > Idec Product Center > Idec
PLC > |
|
|
|
|
 |
Key Features |
 |
- Digital I/O
- 8, 16, and 32 point cards
- 480 I/O points with Expansion Power Supply
- Analog I/O - Up to 42 analog inputs or 14 analog outputs
- Analog I/O - 0-5V, 0-10V, +/-5V , +/-10V, 4-20mA
- Built-In Communications Port - two RS232 (programming
port, ASCII, printer and modem ready)
- Built-In Communications Ports - one RS485 (programming
port and data link)
- Built-in High Speed Counter - 2 phase, 10KHz, 16 bit
resolution
- Memory - 16K User Program Capacity
- Memory - Flash Miniature Card Slot (FC3A-CP2KM/SM only)
- Realtime Calendar/Clock
- Password Protection
- PID Algorithm
|
|
A True Open Architecture PLC |
|
IDEC introduces a true Open Architecture PLC:
the OpenNet Controller (ONC). This unique PLC is compatible
with three major industrial buses, DeviceNet, Interbus-S and
LonWorks. Expanding your I/O and existing network, or
designing a new system to work hand-in-hand with an existing
one is now free of compatibility issues. This open network
architecture gives users the control to design systems that
are more powerful, cost less and provide flexibility as
network technologies change.
The ONC is a high performance PLC with 16K words user program
capacity. The ONC allows the user to store, transfer or
upgrade the program memory using a miniature flash card. The
ONC can handle up to digital 480 I/O, 42 Analog I/O. The
system also allows 512 remote I/O using the Interbus-S
network.
IDEC's OpenNet Controller offers superior communication
flexibility. The ONC comes standard with two RS232 ports,
making connections to any RS232C equipment hassle-free. Direct
modem dial-up and pager applications are easy, through the
built-in Hayes "AT" command set. The CPU is also
built with 1 RS485 port and a 10 KHz quadrature High Speed
Counter.
The OpenNet Controller is enhanced with 65 advanced
instructions including xy conversion, square root and data
block move. Multiple PID algorithms make the ONC an
exceptional Controller. The ONC has all the features needed in
a PLC such as, Real Time Clock, Password protection and catch
input functions. |
|
|
|
