|
| |
| FCS-FI
series |
for
Inductive AC servomotor, Hollow shaft and Flat motor |
| FCS-FS
series |
for Synchronous AC servomotor |
|
 |
 |
|
■Features/
Dedicated functions
|
| １） |
Relative position of a slave axis to master axis position can be set to
a continuous pattern, and free curve motion complying with the master axis
can be designed. |
| ２） |
Max.16 axes can be controlled at
once and various motion pattern setting and editing can be conducted. |
| ３） |
Max.5000 points and 500 patterns
can be memorized. |
| ４） |
By setting major points with editing
software, motion locus of smooth spline curve can be created automatically.
And pattern data made by Excel calibration table software can be handled. |
| Example:
Slave axis rotates. |
|
 |
|
| Slave
axis position 1 cycle |
|
 |
|
 |
|
|
■Features |
| Torque controls can be applied to machining, coiling
and uncoiling that requires even tension on long work line as paper, cable,
tape, sheet, and so forth. |
| ■Dedicated
features |
| Tension
control, Diameter compensation, Feeding and coiling amount calculation,
Torque control |
| ■Application |
| Paper tension of Printing machine, Wire winding
machine, Injection molding machine, Electric dynamometer, Film making machine,
Mold press, Nut runner |
 |
|
|
■Features/
Dedicated function
|
| １） |
Synchronizing ratio can be changed on real time. And Synchronizing speed
of coiling axis and feeding axis of winding machines can be changed on real
time. |
| ２） |
Difference of relative position between
a master axis and a slave axis is compensated by external signals. And with
synchronizing ratio setting, an electric axis function can be used. |
| Line
up wire winding machine |
|
| Example:
Sectional drive of printer |
 |
|
| ■Application |
| Traverse control of Conveyer receiving unit, Wire
winding machine, Coiling machine, Line up wire winding machine, etc. General
Synchronizing control as Cable drawing machine and other various production
lines. |
 |
|
|
■Features/
Dedicated function
|
| １） |
Without stopping running work materials, constant length cut and machining
can be achieved and machining tact can be remarkably reduced. |
| ２） |
50 kinds of continuous machining
patterns can be executed in turns. And plural machining combination as of
cut and press can be achieved to work materials. |
| 3） |
By cosine compensation function,
in case of vertical blade cutting machine as Rotary shirr, from the beginning
of cutting, compensation is addded to get precise vertical cutting. |
|
|
| ■Application |
| Carton cutter, Steel plate flying cutter, Cable
and pipe cutter, Push/ Pull machining, and flying cutter control of the
other production lines |
 |
|
|
■Features/
Dedicated function
|
| １） |
High speed, high accuracy, and high performance. Dedicated positioning control,
combined of Positioning control and high performance servo control functions. |
| ２） |
Max.280 points of internal stored
data can be used to Program run. |
| ３） |
Complete close loop control can be
achieved by an external encoder (measure/ linear scale). |
| ４） |
Simple teaching (reads current value
by opening current device) can be conducted. |
| 5） |
Standard spinner function can program
Acceleration/ Deceleration time, Rated speed time, and Decal. stop time
and easily achieve Run by speed pattern. |
|
Basic/ Expansion
type of NCS-FI1/FS1
|
| １） |
Internal stored Positioning FI10/FS10.I/O
(input:28 points, output: 8 points) Basic type |
| ２） |
Expansion type FI12/FS12 I/O (inputs:37
points, output: 18 points) |
| ３） |
High speed communication type FI13/FS13
Remote sequence control+ internal basic type |
| ４） |
Device net type FI15/FS15.DeviceNet
is installed. Open network can be connected.. |
 |
|
| ■Features/
Dedicated function |
| NCS-FI2/FS2 type consists of FI1/FS1 and sequencer
functions, and conducts not only sequence motion but also gets current position,
speed, torque, etc. information through internally connecting bus, speedy
and directly. |
|
Type of
NCS-FI22/FS22
|
| １） |
With sequence function (SDB) type |
|
FI22/FS22.I/O
(input:64 points, output: 32 points) |
| ２） |
With remote sequence function (SDB)
type |
|
FI23/FS23.Remote
sequence is added to FI22/FS22 |
| NCS-F1/F2
type application |
| Roll feed, Bag making machine,
Packing machine, Palletizer, Pattern printer, Grinder,Auto. warehouse, Index
table, ATC, Spinner cleaner, and other general position control. |
|
