|
| |
| > Fuji
Products Center >
Fuji HMI > UG230
Series |
|
 |
| Specification [UG230 Series] |
 |
| General specifications |
 |
 |
UG230 |
 |
Rated
voltage |
24VDC |
| Permissible range
of voltage |
24VDC±10% |
Permissible
momentary
power failure |
Within
1ms |
Power consumption
(Maximum rating) |
16W
or less |
| Inrush current |
20A
or less (with a rise time 0.1ms) |
| Withstand voltage |
DC
external terminals to FG: 500VAC, 1 minute |
| Insulation
resistance |
500VDC,
10MΩ or above |
 |
Ambient
temperature |
0ºC
to +50ºC * |
| Storage ambient
temperature |
-10ºC
to +60ºC |
| Ambient humidity |
85%
RH or less (Avoid condensation) |
| Solvent resistance |
No
cutting oil or organic solvent clung to the unit |
| Atmosphere |
No
corrosive gas or conductive dust |
| Operating altitude |
Altitude
2000m or less |
 |
Vibration
resistance |
Vibration
frequency: 10 to 150Hz, Acceleration: 9.8m/s2
One-way deflection: 0.075mm, X, Y, Z: 3 directions
for one hour |
| Shock resistance |
Pulse
shape: half sine wave
Peak acceleration: 147m/s2, X, Y, Z: 3
directions, six times each |
 |
Noise immunity |
1000Vp-p
(pulse width 1µs, rise time: 1ns) |
Anti-static
electricity
discharge |
Conforming
to IEC61000-4-2, contact: 6kV, air: 8kV |
 |
Grounding |
Grounding
resistance: less than 100Ω |
| Structure |
Degree of
protection: front panel: IP65 (using waterproof
gasket)
rear case: IP20
Form: in a single body
Mounting method: panel flush mounting
Although the UG series has high environmental
resistance characteristics equivalent to IP65F, it
is expressed as IP65 herein in order to avoid
confusion, as measures are required to meet the
long-hour oil resistance, which is higher than the
IP standard. |
| Cooling system |
Natural
cooling |
| Mass |
Unit
only: approx. 680g, with UG230A-DCL installed:
approx. 820g |
| Case
color |
Black
(Munsell N2.0) |
| Case
material |
PC/PS
resin |
|
|
| * As for UG230H-SS and UG230H-LS, the
display quality might deteriorate and the contrast be weaken
when operated for a long period of time at ambient
temperature 40 to 50ºC. |
|
| Display specifications |
|
|
UG230H-LS |
UG230H-SS |
UG230H-TS |
| Display device |
Monochrome
LCD |
STN
color LCD |
TFT
color LCD |
| Display size |
5.7-inch |
| Colors |
Monochrome,
8 gradations + blinks |
32,768
colors +16-color blinks |
| Resolution W x H
(dots) |
320
x 240 |
| Dot pitch W x H
(mm) |
0.36
x 0.36 |
| Brightness (cd/m2) |
220 |
160 |
350 |
| Contrast ratio |
5?F1 |
30?F1 |
60?F1 |
| Angle of vertical
visibility |
+20º,
-40º |
+20º,
-35º |
+65º,
-40º |
| Angle of
horizontal visibility |
±45º |
±50º |
±65º |
Backlight
|
Cold
cathode fluorescent lamp |
| Average backlight
life *1 |
Approx.
58,000h |
Approx.
54,000h |
Approx.
50,000h |
| Backlight auto OFF
function |
Always
ON, arbitrary setting |
| Contrast
adjustment |
Provided
*2 |
Not
provided |
| Brightness
adjustment |
Not
provided |
128
levels *2 |
| Surface sheet |
Material:
Polycarbonate, 0.3mm thick |
| POWER lamp |
ON
(green) when the power is supplied.
ON (orange) when the voltage of the battery
connected has become low. |
|
|
*1 At the time when the surface brightness
is down to 50% of the initial value at normal temperature of
25ºC.
*2 Adjustment by a function switch or macrocommand. |
|
|
|
|
|
