|
| |
| > Fuji
Products Center >
Fuji Servo FALDIC-α
Series |
|
 |
|
|
 |
|
|
|
AC Servo Systems
FALDIC-α
Series
(Available only in
Japan)
|
| Based on a concept of the
four Fs
described here, the FALDIC-α
Series offers improved basic
performance, a user-friendly
PC loader, and real-time
mechanical tuning. It
shortens set-up time and
improves mechanical
performance. |
|
 |
- Fine
The series features superb
response (600Hz frequency
response) enabling forward and
reverse operations at 600
revolutions/s, and excellent
control performance with 1ms
position setting. Combined with
the GYS-series low inertia
servomotor, it can be applied to
high-power-rate, high-tact
machines.
- Friendly
The PC loader supports
everything from servomotor
capacity selection (planned) to
test runs, maintenance,
inspection, and troubleshooting.
As standard equipment, a touch
panel is provided for easier
maintenance, and a control power
supply input terminal allows
maintenance with the power
supply for system power turned
OFF.
- Flexible
The servomotor is equipped with
a reduced-wiring 16-bit serial
encoder for both INC and ABS
use.
Encoder wiring requires only
four wires: two for the power
supply, and two for signals.
Upper link interfaces include
DI/DO, RS-485, DeviceNet
(planned) and the Fuji Electric
private links SX Bus and T Link.
- Facility
The range of application has
been expanded with three types
of servo amps and servomotors in
two shapes.
The series also conforms to
international standards (CE
Mark, UL, C-UL pending).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Catalog
FALDIC-αSerles
[MEH392a] (PDF-1.176KB)