 |
Fuji Low-Noise, Standard-Type
Inverters
FRENIC5000G11S/P11S Series
 |
 |
G11S Series
(Low-noise, high-performance, multi-function
inverters)
- An excellent starting torque of 200% at 0.5Hz
is realized by employing Fuji Electric's unique
torque vector control system.
- An automatic-tuning function and other
intelligent and convenient functions are
incorporated.
- Inverters are compact and totally enclosed
(models up to 22kW), in a wide variation from
0.2 to 400kW.
|
 |
P11S Series
(Low-noise inverters for fans and pumps)
- These inverters are specially designed for
variable torque loads, such as fans and pumps.
- An automatic energy-saving function is
included for simple energy-saving operation.
- An interactive keypad panel is incorporated as
standard equipment, allowing you to operate the
inverter without a manual.
|
|
 |
|
|
|
|
|
Fuji Low-Noise,
Standard-Type Inverters
FRENIC5000G11S/P11S
Series
|
(Available only in
Japan)
| Series |
FRENIC5000G11S |
FRENIC5000P11S |
| Output overload
capability |
200% of
rated current for 0.5s
150% of rated current for 1min |
110% of
rated current for 1min |
| Braking
torque |
Regenerative braking |
150% or more
at 3% ED
__(0.75kW
or less)
100% or more at 5 to 2% ED
__(1.5
to 7.5kW or less)
20% or more
__(11
to 22kW)
10 to 15%
__(30kW
or more) |
20% or more
__(11
to 22kW)
10 to 15%
__(30kW
or more) |
| DC injection braking |
Starting
frequency: 0.1 to 60Hz
(adjustable)
Braking time: 0 to 30s
(adjustable)
Braking voltage: 0 to 100%
(adjustable) |
| Acceleration/deceleration
time |
0.01
to 3600s
(Acceleration/deceleration can
be set independently) |
| Multi frequency
control |
16
steps |
| Frequency
setting signal |
0
to  5V
DC, 0 to 10V
DC, 4 to 20mA |
| Protective
functions |
Stall
prevention, overcurrent,
instantaneous power failure or
undervoltage, overvoltage,
inverter overheating, external
alarm (tripping of external
thermal overload relay), motor
overload (tripping of
electronic thermal overload),
communications error, CPU
error, memory error,
short-circuit, ground fault,
blown out fuse, input
open-phase protection, output
open-phase protection |
| Alarm relay
output |
SPDT
contact |
| Enclosure and
cooling method |
Totally
enclosed natural cooling type
[IP40]
__(0.75kW
or less)
Totally enclosed fan cooling
type [IP40, except fan]
__(1.5
to 2.2kW)
Fan cooling type [IP00]
__(30kW
or more)
For inverters of 30kW or more,
the totally enclosed type
[IP20] is optional. |
Totally
enclosed fan cooling type
[IP40, except fan]
__(5.5
to 22kW)
Fan cooling type [IP00]
__(30kW
or more)
For inverters of 30kW or more,
the totally enclosed type
[IP20] is optional. |
|
|
|
|
|
|
|
|
