|
| |
| > Idec Product Center > Idec
Sockets |
|
|
|
|
|
|
|
 |
 |
|
Din Rail &
Surface Mount Sockets |
 |
| IDEC pioneered the popular and much
copied DIN rail, snap-mount sockets. In fact, you've
probably been relying on these high quality IDEC
sockets for years and just didn't know it. IDEC
supplies sockets for many other manufacturers, and has
done so for a long time. But if you're not certain
you're getting the world's best-selling, highest
quality sockets available, it's time you plugged into
IDEC. |
|
|
Key Features |
|
- Worldwide Approvals : UL, CSA, TUV, CE
- UL94-V0 flame resistant material
- Many models available in fingersafe versions
(with IEC standard terminal numbering)
- Unbreakable nylon construction
- Rust-proof double nickel-plated steel screws are
available in applicable models (withstands 96 hour
salt spray test)
- Hold down springs and clips available for most
models.
- Receptacles with four contact points per blade
- Spring Clamp sockets available
|
|
|
|
|
 |
|
Panel Mount
Sockets |
|
| Panel mounting sockets allow for
easy relay or timer replacement from outside the
panel without exposing personnel to live wiring.
Ideal for such applications as test fixtures where
relays of different voltages may need to be swapped
on a regular basis. Available either as snap-in or
screw-down mounting, all models use pre-tinned
solder terminals. Hold down springs are available
for most models, and pin arrangements accommodate
several industry standard relay pin configurations. |
|
|
Key Features |
|
- Through-panel mounting
- Hold down springs avaialble for all models
- Industry standard pin arrangements
- Snap-in and Screw-down models
|
|
|
|
|
 |
|
PCB Mount
Sockets |
|
| An alternative to soldering
relays directly to a PC board, sockets allow for
easy replacement of relays or timers. Available in
several industry standard pin arrangements
(.110" and .187" blades) Hold down
springs are available for all models, to ensure
the relays stay in their place. |
|
|
|
Key Features |
|
- Hold down springs available for all models
- Industry standard pin/receptacle
arrangements
|
|
|
|
|
 |
IEC Terminal Numbering
Q:
Does IDEC offer any sockets that use the IEC
standardized terminal numbering?
A: Yes. All of our
DIN rail mountable sockets with fingersafe
terminals (part numbers ending in "C")
have both our standard terminal numbering and
the IEC standard terminal numbering (in a
different font).
|
|
|
|
|
|
