Koyo PLCs ! Koyo PLC ! Koyo ! Koyo FA ! Koyo Electronics !Koyo Series DL05

	Technical specifications DR/DR-D, DD/DD-D and DA
	General specifications
External Power Requirements Communication Port 1 Communication Port 2 Programming cable type Operating Temperature 32 to Storage Temperature Relative Humidity Environmental air Vibration Shock Noise Immunity Terminal Type Wire Gauge	95-240 VAC, 30 VA maximum NOTICE: Type DO-05-DR-D/DO-05-DD-D: 12-24V DC, 20 W max. 9600 baud (Fixed), 8 data bits, 1 stop bit, odd parity K-Sequence (Slave) DirectNET (Slave) MODBUS (Slave) 9600 baud (default), 8 data bits, 1 stop bit, odd parity K-Sequence (Slave) DirectNET (Master/Slave) MODBUS (Master/Slave) Non-sequence/print D2-DSCBL 131°F (0 to 55°C) -4 to 158°F (-20to 70°C) 5 to 95% (non-condensing) No corrosive gases permitted MIL STD 810C 514.2 MIL STD 810C 516.2 NEMA ICS3-304 Removable One AWG16 or two AWG18, AWG24 minimum
DC INPUT SPECIFICATIONS Parameter Min. - Max. Voltage Range Operating Voltage Range Peak Voltage Minimum Pulse Width ON Voltage Level OFF Voltage Level Input Impedance Max. Input Current Minimum ON Current Maximum OFF Current OFF to ON Response ON to OFF Response Status Indicators Commons AC OUTPUT SPECIFICATIONS Output Voltage Range (Min. - Max.) Operating Voltage On Voltage Drop Max Current Max leakage current Max inrush current Minimum Load OFF to ON Response ON to OFF Response Status Indicators Commons Fuses	High-Speed Inputs, X0-X2 10.8-26,4 VDC 12-24 VDC 30 VDC (5 kHz minim. frequency) 100 us > 10 VDC < 2.0 VDC 1.8kOhm @ 12-24 VDC 6mA @12VDC 13mA @24VDC >5 mA <0.5 mA <100 us <100 us Logic side 4 channels/common x 2 bank ONLY SERIES DR/DR-D Notice: External power requirements for DR-D 15-264 VAC, 47 - 63 Hz 17-240 VAC, 47 - 63 Hz 1.5 VAC @> 50mA, 4 VAC @<50mA 0.5 A/point, 1.5 A/common < 4 mA @ 264 VAC, 60Hz 10 A for 10 mS 10 mA 1 mS 1 mS + 1/2 cycle Logic Side 3 channels/common x 2 banks None (external recommended)	Standard DC Inputs X3-X7 10.8-26.4 VDC 12-24 VDC 30 VDC N/A > 10 VDC < 2.0 VDC 2.8kOhm @ 12-24 Ohm 4mA @12VDC 8.5mA @24VDC >4 mA <0.5 mA 2 - 8 mS, 4 mS typical 2 - 8 mS, 4 mS typical Logic side 4 channels/common x 2 bank
DC OUTPUT SPECIFICATIONS Parameter Min. - Max. Voltage Range Operating Voltage Peak Voltage On Voltage Drop Max Current (resistive) Max. leakage current Max. inrush current External DC power required OFF to ON response ON to OFF Response Status Indicators Commons Fuses	ONLY SERIES DD/DD-D Notice: External power requirements for DD-D Pulse Outputs, YO-Y1 5 - 30 VDC 6 - 27 VDC < 50 VDC (7 kHz max frequency) 0.3 VDC @ 1A 0.5 A/pt., 1A/pt. as standard pt. 15 uA @ 1A 2 A for 100 mS 20-28 VDC Max 150 mA < 10 us < 30 us Logic Side 6 Channels/Common x 1 banks None (external recommended)	ONLY SERIES DD/DD-D Notice: External power requirements for DD-D Standard Outputs, Y3-Y5 5-30 VDC 6-27 VDC < 50 VDC 0.3 VDC @ 1A 1.0 A / point 15 uA @ 30 VDC 2 A for 100 mS 20-28 VDC Max 150mA < 10 us < 60 us Logic Side 6 Channels/Common x 1 banks None (external recommended)
AC OUTPUT SPECIFICATIONS Number of output points Number of commons Output voltage range Peak voltage ON voltage srop Maximum current Maximum leakage current Maximum inrush current Minimum load OFF to ON response ON to OFF response Fuses	ONLY SERIES DA 6 2 (isolated) 17-240VAC, 47-63Hz 264VAC 1.5VAC >50mA 4.0VAC <50mA 0.5A/point 4mA -264VAC 10A for 10ms 10mA 1ms 1ms + 1/2 cycle None (external recommended)