|
|
|
|
|
|
Koyo
series 05
Eight
Inputs and six outputs • Two communication ports •
5Khz high-speed
counter or interrupt input • 129 instructions for
programming • 2K program
memory • 4K data memory • Modbus RTU/Directnet
communication • 4 PID
LOOP • Removeable terminal block for your
installation convenience
|
|
|
Koyo
series 06
Fixed
I/O of 20 inputs and 16 outputs with four option card slots
for expansion
(discrete, analog, communication modules), all in the same
package.
7.5 program memory • 7.3K data memory • Two
communication ports
including built-in RS232/RS422/RS485 port • 229
instructions, including eight
PID loops and ASCII
|
|
|
Koyo
series 205
Up
to 1280 I/O local • 8192 I/O total • Two
communication ports • Over
30 types
of I/O modules • Up to 170 instructions for programming
• 7,5K program memory
• 7K data memory • Modbus RTU / Directnet
communication • 4 PID LOOP •
Floating-point Math •
Real time clock calender
|
|
|
Koyo
series 405
Up
to 2048 I/O local • 8192 I/O total • Four
communication ports • Over
40 types
of I/O modules • Up to 170 instructions for programming
• 15,5K program
memory • 15K data memory • Modbus RTU / Directnet
communication
16+96 PID LOOP • 100 Khz high speed counter •
Floating-point Math • Real Time
Clock Calendar
|
|
|
Koyo
Terminator I/O
Terminator I/O is the flexible cost saving solution for a
distributed I/O system, used for e.g. SoftPLC systems, I/O
extension to your PLC system or simply as data collection
points for an OPC server. You can distribute I/O nodes with
Terminator I/O close to the field devices for faster and more
efficient wiring and troubleshooting. A full range of network
modules are supported, including Ethernet with Host IP and/or
Modbus TCP protocol, DeviceNet, Modbus, Koyo remote I/O and
Profibus (released autumn 2001).
|
|
|
Koyo
EBC
Ethernet
Base Controller for DL205/405 base, supports discrete and
analog I/O.
Supports 10 base-T connections to PC-based controllers,
supporting IP/IPX
protocol.
|
|
|
Koyo
ECOM
Ethernet
Communication module, master/slave on an Ethernet 10 baseT
network at 10 Megabaud.
|
|
|
Koyo
PLC software
Directsoft,
32-bit PC programming and documentation software, includes
software on CD-ROM and user/quickstart manual. 32-bit
application,
requires Windows 95/98 or NT. |
