|
| |
 |
|
GP2000H Series Line-up |
|
|
 |
 |
| Model: GP2401H-TC41-24V |
 Application: 2MB FLASH EPROM |
 6.5inch 640×480 TFT color LCD |
 256 colors *1 |
|
|
 |
 |
| Model: GP2301H-SC41-24V |
| Application: 1MB FLASH EPROM |
| 5.7inch 320×240 STN color LCD |
| 64 colors |
|
|
 |
 |
| Model: GP2301H-LG41-24V |
| Application: 1MB FLASH EPROM |
| 5.7inch 320×240 Monochrome LCD |
| Monochrome |
|
|
| *1 Changing the "Colors" setting to "256 color" will disable the blinking feature on all screens in your project. If you wish to use the blinking feature, select "64 colors". |
GP2000H Series Features |
|
|
|
Minimize Accidents Caused by Human Nature
3-position Enable Switch |
|
|
|
When a human is startled, it naturally stiffens and holds a unit's controls tightly.
The GP2000H unit's 3-position enable switch with dual circuit is designed with this in mind and operates only when it is lightly pressed and held. If it is tightly pressed, the contacts are opened. |
|
 |
|
Quick, Safe Emergency
Switch
3-contact Emergency Switch |
|
|
|
| This switch boosts the level of safety in the event of an emergency. Two contacts of this switch's use a forced-break mechanism to physically break the circuit. To protect against dual-circuit damage, the third contact can be used to trigger an inversion circuit. |
|
 |
|
Vibration Feature Alerts You to Errors and Alarms
Vibration Function |
|
|
|
| With most hand-held units, there is a chance that you might overlook an alarm indication when you are watching a machine or the line. An internal motor in the GP2000H makes sure this won't happen by vibrating to alert you to alarms and warnings. |
|
 |
|
3-position Enable Switch |
3-contact Emergency Switch |
| Can be applied to standards |
| - IEC/EN 60947-5-1 |
| - ANSI/RIA R15.06-1999 |
|
| - ISO13850 |
| - IEC/EN60947-5-1 |
| - EN418 |
|
| Conforms to standards |
|
|
| Recognized |
| - UL 508 (CSA C22.2 No.14) |
|
| - UL 508 (CSA C22.2 No.14) |
|
|
CF Card Interface |
|
|
|
A standard-equipment CF Card interface lets you easily back up various production data or screen data. You can then re-use or analyze the data on your host PC.
A single CF Card lets you quickly set up your unit's screens in offline mode, and helps speed up application updates maintenance work. |
|
 |
| |
- The colors in this page and the PDF catalog may differ
from those of the actual unit.
- Actual user screens may differ from the screens shown here.
- LCD screens may exhibit minute grid-points (light and dark) on the Display Panel surface. Also, "Contouring" - where some parts of the screen are brighter than others, producing a wavelike pattern - may occasionally occur. Both are normal for an LCD display and are not defects.
- All product names used in this page and the PDF catalog
are the registered trademarks of their respective companies.
- All information contained in this page and the PDF
catalog is subject to change without notice.
|
 |
Caution: Before operating any of these products, please be sure to read all related manuals thoroughly.
|
|
|
|
