|
| |
| Home > Yaskawa Inverter
> J1000 Inverter |
|
The J1000 is a world-class compact variable frequency drive
that defines a new world standard. Demands for efficient
production and better maintainability are on the rise, spurred
by global competition. Yaskawa drives have earned a reputation
for high performance, high functionality, and high quality.
Great things come in small packages! |
|
Specifications
and Features for J1000 Drive
|
|
In our pursuit to create drives optimized for variable
speed needs in compact applications, the J1000 is the
solution. This micro-drive is simple andreliable with
even higher quality. Demand continues to increase for
a compact shaft turner with hassle-free maintenance.
Yaskawa drives haveearned a reputation for high
performance, high functionality, and high quality.
Performance Features
- Ratings:
1/8 to 3 HP at 200-240 VAC 1-ph
1/8 to 5 HP at 200-240 VAC 3-ph
1/2 to 7.5 HP (ND) at 380-480 VAC 3-ph
- Overload Capacity:
150% for 60 sec. (Heavy Duty)
120% for 60 sec. (Normal Duty)
- Control Methods: V/f Control
- DC injection braking, ramp to stop
- Electronic reversing
- Adjustable accel/decel: 0.0 to 6000.0
seconds
- Controlled speed range: 40:1
- Speed Regulation:
± 0.5 to 1% with slip compensation
- Displacement power factor: 0.98
- Output frequency: 0 to 400 Hz
- Frequency resolution:
0.01 Hz with digital reference
0.06 / 60 Hz with analog reference
- Frequency accuracy:
0.01% with digital command
0.5% with analog command
- Volts / hertz ratio: infinitely
adjustable pattern
- DC Injection braking: adjustable
amplitude,
duration, current limited
- Torque boost: full range, auto
- Power loss ride-thru: 0.5 sec.
- Speed search
- Auto restart
- 2 Critical frequency rejection settings
- Slip Compensation
Protective Features
- Current limit, stall prevention during
accel, decel, and run
- Motor and drive overload
- Over voltage prevention function
- Instantaneous over current
- Short circuit
- Under voltage
- Heatsink overheat
- Ground fault protection
- Over/under torque
- Short circuit current rating: 30KAIC RMS
Options
- Dynamic Braking resistor (external)
- Remote LED Operator w/ copy function
- Modbus 232/422/485 Communications
- Analog Potentiometer Card
- DriveWizardTM Plus
- DIN rail mounting kit
- Y-Stick Copy Unit
|
Design Features
- 16-bit microprocessor logic
- Digital keypad operator, 5 digits
- LED status display
- Remote Mount Keypad Capability
- 5 multifunction digital inputs
- 1 multifunction digital output
- Programmable form C output contact for
customer use: 1A at 250 VAC or 30 VDC
- 24 VDC control logic compatible with
sourcing or sinking outputs (PNP or NPN)
- Carrier frequency: 15 kHz max; swing PWM
- 8 multi-speed settings plus jog speed
- 1 Remote speed reference:
0-10 VDC (20 kohms) or isolated
4-20 mA (250 ohms)
- Signal follower: bias and gain
- Analog monitor output:
0-10 VDC proportional to output
frequency or output current
- 133 parameters
- Cooling fan controlled by drive run/stop
- UL recognized electronic overload
- MTBF: 28 years
- Built-in Dynamic Braking Transistor
- Protected Chassis
- Side-by-Side mounting
- Maintenance monitors
Service Conditions
- Ambient service temperature:
-10° to 50°C (+14° to 122°F)
- Ambient storage temperature:
-20° to 60°C (-4° to 140°F)
- Humidity: to 95% non-condensing
- Altitude: to 3300 ft; higher by derating
- Service factor: 1.0
- Input voltage: -15% to +10%
200 to 240 VAC, 380 to 480 VAC
- Input frequency: +/-5%; 50/60 Hz
- Input phase sequence insensitive
Standards
- UL 508C (Power Conversion)
- CSA 22.2 No. 14-95
(Industrial Control Equipment)
- UL, cUL listed; CE marked
- RoHS compliant
- EN 50178 (LVD)
- EN 50081-2, EN 50082-2 (EMC)
- EN 61800-3
- IEC 529, 146
- FCC CFR 47 Part 15 Subpart B
(w/ External Filter)
|
|
|
|
|
|
J1000 Drive